Roofing Glendale Springs homes the way we have since 2002 — measured on site, priced in writing, and finished the way we would want our own roof finished.
Pick a service to see how we handle it and what the job usually looks like on a Glendale Springs roof.
Water runs along decking and rafters before it ever drips, so the stain is rarely under the hole. We trace the leak back to where it really starts and fix that.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
New skylights set into metal or shingle roofs, with the flashing kit the roof actually calls for rather than a tube of sealant.
Waterproofing details on additions, porches and low slope tie ins, where two roofs meet and most leaks quietly begin.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Steam and hand work, never a hammer and chisel on your roof. Then we check the eaves for the damage the ice already did.
After a storm we walk the roof, photograph everything we find, and write an itemized estimate you can hand straight to your adjuster.
Temporary cover goes on fast, then we come back and make the permanent repair once we can see properly what we are working with.
Reflective coatings keep a metal roof cooler in summer and seal up the small stuff before it turns into a leak.
Slate and tile take patience and matching pieces. We replace broken and slipped units and rework the flashing they hide.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
Low slope roofs fail at the joints and around anything that sticks through them. That is where we start, not out in the middle of the field.
We repair standing seam, exposed fastener panels and metal shingles, and we match the color as closely as the paint system will allow.
A replacement is a big spend and it should feel orderly. We schedule around dry weather, work in the right order, and never leave a house open overnight.
We work around your hours, weekends included when that is what it takes to keep your doors open while the roof goes on.
From a few tabs to a whole slope, we fix shingle roofs without pushing you toward a replacement you are not ready for.
Guards and screens so you are not up a ladder every fall digging pine needles out of the gutter by hand.
Lifted panels, missing shingles, flashing that has given up where the chimney comes through. We find what is actually wrong, fix that, and leave the rest of your roof alone.
Inspections come free with an estimate. We would rather find the small problem this spring than replace a ceiling for you next winter.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
Roofing Brothers began in 2002 as a family roofing company in Morganton, North Carolina, and it is still run the way it started. Homeowners in Glendale Springs reach that same outfit — the one that has been setting metal panels and laying shingles for over twenty years — through our network of local crews.
In a city the size of Glendale Springs, word travels fast about who does good work and who does not. That suits us fine. We would rather put one roof on right and have the neighbors ask about it than chase volume all over North Carolina.
Nothing fancy — free estimates, honest answers, and roofs that go on straight.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
Common questions from Glendale Springs, NC homeowners about metal roofs, repairs and what a roof costs.
A typical Glendale Springs shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
Often, yes. Plenty of the Glendale Springs roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
Most Glendale Springs metal roof jobs land somewhere between about $12,000 and $30,000 in 2026, depending on square footage, pitch, panel type and how much tear off there is. Standing seam runs higher than exposed fastener panels. We measure before we quote, and the estimate is free.
We do. After a storm we photograph the damage on your Glendale Springs roof and write an itemized estimate you can hand to your adjuster. We do not file the claim for you and we will not promise you what an adjuster is going to approve — that is their call, not ours.
Sometimes. If the decking is sound and there is only one layer of shingles, a Glendale Springs metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Any dry stretch works. We roof in Glendale Springs year round, though we schedule shingle work for when it is warm enough for the strips to seal properly, and we watch the forecast so your house is never left open overnight.
What people say once the crew has packed up and gone home.
"Burgundy metal roof on our brick ranch and I get compliments on it constantly. They brought the color chart out and let us take our time deciding."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Nice work on the roof and good communication throughout. I would have liked a little more warning about the dumpster arriving, but that is a small thing."
Looking for a roofer just outside Glendale Springs? These areas are covered too.